Southern Cross Equipment Home  |  About Us  |  Applications  |  Products  |  Training  |  FAQ  |  Contact Us  |  Forum  |   

Descenders & Belay Devices

 PMI Quadra Braking Device
PMI Qudra Braking Device
 
RRP $369.00 incl gst
 
The Quadra can change instantly from one mode to another while under load. A special braking mechanism increases the frictional force for lowering heavy loads. This device will arrest a 2 person fall factor by 1/3 when in lifelining mode with no rope damage. It will also retain full function after a fall. Key Features: Stainless steel . Patented secondary braking system.
TOP
Edelrid Eddy Belay 
Edelrid Eddy Belay
 
RRP $199.95 incl gst
 
The Eddy has established itself since its introduction in 2005. A belay device predominantly for sport and indoor climbing. The Eddy is simple and safe, easy to thread with the rope following logically the rope flow. A controlled descent with an emergency break system eliminates the „panic pull“ syndrome which can lead to serious accidents. The Eddy provides maximum safety whether top roping or lead climbing with easy paying out of rope to the leader. For use with single ropes from 9 to 11 mm diameters.
 
Technical specifications
  • Weight: 350g
  • Certified: CE
TOP
DMM Anka Descender
DMM Anka Descender
 
RRP $59.50 incl gst
 
Designed for maximum durability and heat dissipation. The wings reduce the chance of the rope locking around the device.
Perfect for Military and Centre use.
  • Material: Aluminium
  • Strength: 30kN
  • Weight: 114g
  • Length: 145mm
  • Width: 80mm
  • Conforms to EN362:2004
TOP
 Petzl I'D
Petzl I'D - Self-braking descender belay device with anti-panic function
 
RRP $319.00 incl gst
 
For descending a rope and for belaying, with an anti-panic function.
  • Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope.
  • Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope.
  • Locking position on the handle for positioning while on the rope.
  • When used for hauling, allows the system to be reversible.
  • Available in 2 versions:
    • D20 S for work on ropes.
      With a safety clip on the swinging side plate: reduces the risk of dropping the device, practical for quick installation of the rope, efficient means for passing intermediate anchors.
      For ropes between 10 and 11,5 mm in diameter.
    • D20 L for rescue.
      For ropes between 11,5 and 13 mm in diameter.
Certification
  • D20 S : CE EN 341 Class A, NFPA L.
  • D20 L : CE EN 341 Class A, NFPA G.
 
Technical specifications
  • Weight: 530 g.
  • D20 S: for rope diametres from 10-11.5 mm.
  • D20 L: for rope diametres from 11.5-13 mm.
  • Individually tested.
TOP
 Petzl Gri-Gri
Petzl Gri-Gri - Self-braking belay device and descender
 
RRP $129.00 incl gst
 
For work positioning on inclined surfaces and for switching between short ascents and descents on a rope.
  • Simple to use:
    • control the rope running through the device by varying the grip on the free end of the rope,
    • use the handle to unlock the rope,
    • self-braking system: if the handle is released during descent, the cam rotates to pinch the rope and brake the user's descent.
    • ascending the rope is possible without changing the position of the device: simply add a footloop and a handled rope clamp / grab.
  • Allows for belaying a leader or second. If a fall occurs, device facilitates braking.
Certification
  • CE
Technical specifications
  • For rope diameters from 10 to 11 mm
  • Weight: 225 g
TOP
Petzl Stop 
Petzl Stop - Self-braking descender for single rope
 
RRP $139.95 incl gst
 
  • Self-braking system operates when the handle is released.
  • The rate of descent is controlled by varying the grip on the free end of the rope.
  • Rope climbing is possible without changing the position of the STOP by adding a foot loop and a handled rope clamp / grab.
  • Spring clip allows the rope to be inserted without removing the STOP from the harness.
  • Replaceable cam and friction bobbin.
Certification
  • CE EN 341 class A
Technical specifications
  • For use on single ropes from 9 to 12 mm
  • 326 g
TOP
Petzl Rack 
Petzl Rack - Variable friction descender
 
RRP $145.00 incl gst
 
Allows the friction to be varied when the descender is under load to adapt to changing conditions (rope weight, terrain, etc).
  • The number of bars engaged on the rope may be adjusted at any time to obtain the desired amount of friction.
  • Good distribution of friction and heat helps preserve the rope.
  • Does not twist the rope.
Technical specifications
  • For use on a single ropes (9 to 13 mm) or double ropes (8 to 11 mm)
  • 470 g
TOP
Petzl Huit 
Petzl Huit - Figure-eight descender
 
RRP $36.95 incl gst
 
For descending on single or double rope.
  • Square shape to reduce twisting of the ropes and formation of a lark's head knot.
  • High strength forged aluminum.
  • Small hole can be used with thin ropes if necessary, or as a belay plate.
Technical specifications
  • For use with ropes from 8 to 13 mm
  • 100 g
TOP
Petzl Tuba 
Petzl Tuba - Knot-passing friction brake
 
RRP $call incl gst
 
Designed for lowering loads over long distances.
  • The braking power is easily adjusted by varying the number of turns of rope around the device.
  • Special shape allows the passage of a knot, allowing several ropes to be joined together for long lowers.
Certification
  • NFPA G
Technical specifications
  • 1240 g
TOP
Petzl Reverso 
Petzl Reverso
 
RRP $44.95 incl gst 

Belay device for the leader or the second, descender. For use with single or double ropes.

  • Multipurpose device: belaying the leader, one or two seconds, or as a descender.
  • Attachment point for direct attachment to belay (for belaying one or two seconds in self-braking mode).
  • Separation of ropes for easier clipping of alternate points and avoids crossing of the ropes when rappelling.
  • Grooved spacers allow excellent control of the rope for rappelling and lowering.
  • Does not twist the ropes.
Technical specifications
  • Weight: 80 g.
  • For 8 to 9 mm half ropes and 10 to 11 mm single ropes.
TOP
Faders Figure of 8 
Faders Figure of 8
 
RRP $19.95
 
A forged Duralamin heat treated descender for the budget minded. A good workhorse at a price that wont break the bank.
 
Technical specifications:
  • Strength: 40 kN
  • Weight: 145 g
TOP
Wild Country Super 8
Wild Country Super 8
 
RRP $29.95 incl gst
 
Even though ‘bucket’ type belay devices are the most popular on the market today, for certain jobs they don’t provide the same sort of friction or control that can be got from a Figure of Eight. This is especially true when abseiling on thinner ropes, or iced up ropes, which are difficult to get into other devices.
So although the Super 8 looks simple and a little old fashioned it can still be considered as a valid part of the armoury and an invaluable tool for Alpinists and all-rounders. And made of 6082 T6 alloy to Wild Country’s specific design demands the Super 8 is also one of the lightest of its type on the market
 
  • Material: Aluminium
  • Strength: 25kN
  • Rope Diameter (Single Rope): 10-11mm
  • Rope Diameter (Double Rope): 8.5-9mm
  • Weight: 75g

TOP
Wild Country VC Pro
Wild Country VC Pro
 
RRP $42.95 incl gst
 
Wild Country VC Pro Variable Controller
  • Material: Aluminium
  • Weight: 70g 
  • Rope Diameter: 8.5 - 11mm

The Variable Controller was one of the first devices to move belay plates onto another level. Its wedge shaped design, which gave the VC its name, was able to be used in two performance modes to give more stopping power or less friction depending on circumstance. This combined the best attributes of ‘flat’ plates with the best of the ‘deep’ plates meaning that when belaying rope could be fed quickly, but when abseiling more friction could be applied.

TOP